|
|
|
National Stock Number:
3040-01-237-6263
Federal Supply Class:
3040
National Item Identification Number:
012376263
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| 441 268 10 33 | 64678 | DAIMLER TRUCK NORTH AMERICA LLC | | 441 268 10 33 | CN7Z7 | MERCEDES-BENZ AG | | 441 268 10 33 | D8046 | DAIMLER AG |
|
Techincal Specification:
| STEP QUANTITY | 2 | | END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 15.6 MILLIMETERS NOMINAL | | FIRST END STYLE | PLAIN | | LARGEST STEP DIAMETER | 70.0 MILLIMETERS NOMINAL | | PROPRIETARY CHARACTERISTICS | PACS | | OVERALL LENGTH | 99.0 MILLIMETERS NOMINAL | | SECOND END DIAMETER | 20.0 MILLIMETERS NOMINAL | | SECOND END GROOVE WIDTH | 10.0 MILLIMETERS NOMINAL | | SECOND END DISTANCE FROM HOLE CENTER TO END | 9.0 MILLIMETERS NOMINAL | | SECOND END STYLE | CROSS DRILLED AND CIRCULAR GROOVED |
|
|