|
|
|
National Stock Number:
3040-01-237-1296
Federal Supply Class:
3040
National Item Identification Number:
012371296
Description:
SHAFT,SHOULDERED
Detail:
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
|
Manufacturer Information:
| A82302-5 | 82106 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| END SIMILARITY | NOT IDENTICAL | | FIRST END DIAMETER | 0.7812 INCHES NOMINAL | | FIRST END GROOVE DIAMETER | 0.2500 INCHES NOMINAL | | FIRST END GROOVE WIDTH | 0.1562 INCHES NOMINAL | | FIRST END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.281 INCHES NOMINAL | | FIRST END DISTANCE FROM END TO GROOVE | 0.750 INCHES NOMINAL | | FIRST END SPLINE QUANTITY | 12 | | FIRST END STYLE | TWO CIRCULAR GROOVES AND SPLINED (STRAIGHT_) | | FIRST END SPLINE LENGTH | 0.688 INCHES NOMINAL | | FIRST END SPLINE MAJOR DIAMETER | 0.6562 INCHES NOMINAL | | FIRST END SPLINE MINOR DIAMETER | 0.4688 INCHES NOMINAL | | LARGEST STEP DIAMETER | 0.750 INCHES NOMINAL | | OVERALL LENGTH | 2.844 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | SECOND END GROOVE DIAMETER | 0.0938 INCHES NOMINAL | | SECOND END GROOVE WIDTH | 0.2500 INCHES NOMINAL | | SECOND END DIAMETER | 0.7500 INCHES NOMINAL | | SECOND END DISTANCE BETWEEN FIRST AND SECOND GROOVE CENTERS | 0.281 INCHES NOMINAL | | SECOND END DISTANCE FROM END TO GROOVE | 1.156 INCHES NOMINAL | | SECOND END SPLINE QUANTITY | 18 | | SECOND END STYLE | TWO CIRCULAR GROOVES AND SPLINED (STRAIGHT_) | | SECOND END SPLINE LENGTH | 1.000 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 0.5625 INCHES NOMINAL | | SECOND END SPLINE MINOR DIAMETER | 0.4062 INCHES NOMINAL | | STEP QUANTITY | 7 |
|
|