| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| BODY MATERIAL | STEEL, AISI C1015 |
| BORE DIAMETER | 6.000 INCHES NOMINAL |
| COMPRESSED LENGTH | 75.750 INCHES NOMINAL |
| EXTENDED LENGTH | 137.375 INCHES NOMINAL |
| FEATURES PROVIDED | CLEVIS PIN AND CUSHIONED STROKE |
| FIRST END EXTERNAL THREAD LENGTH | 3.000 INCHES NOMINAL ALL WORKING ENDS |
| FIRST END OUTSIDE DIAMETER | 2.500 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD CLASS | 2A ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIAMETER | 1.875 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 12 ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UN ALL WORKING ENDS |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END AND 1 PISTON ROD END |
| PORT STYLE | GASKET SEAL ALL PORTS |
| PORT THREAD CLASS | 2A ALL PORTS |
| PORT THREAD DIAMETER | 1.625 INCHES NOMINAL ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 12 ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | UN ALL PORTS |
| PRESSURE RATING | 3000.0 POUNDS PER SQUARE INCH MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING TYPE AND LOCATION | FORK CYLINDER HEAD END |
| OVERALL HEIGHT | 7.500 INCHES NOMINAL |
| OVERALL WIDTH | 7.500 INCHES NOMINAL |
| SPECIAL FEATURES | W/ NEEDLE AND CHECK VALVES,PISTON LIP SEAL |
| TEMP RATING | -10.0 DEG FAHRENHEIT AND 165.0 DEG FAHRENHEIT |