| DESIGN CHARACTERISTICS | DOUBLE ACTING TANDEM CYLINDER |
| BODY MATERIAL | STEEL |
| BORE DIAMETER | 2.000 INCHES NOMINAL |
| COMPRESSED LENGTH | 14.125 INCHES NOMINAL |
| EXTENDED LENGTH | 20.625 INCHES NOMINAL |
| FIRST END EXTERNAL THREAD LENGTH | 1.125 INCHES NOMINAL |
| FIRST END OUTSIDE DIAMETER | 1.000 INCHES NOMINAL |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED |
| FIRST PISTON ROD END THREAD CLASS | 2A |
| FIRST PISTON ROD END THREAD DIAMETER | 0.750 INCHES NOMINAL |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 16 |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 2.050 INCHES MINIMUM AND 4.125 INCHES MAXIMUM |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 2.050 INCHES MINIMUM AND 4.125 INCHES MAXIMUM |
| PISTON ROD END SIMILARITY | IDENTICAL |
| PORT LOCATION AND QUANTITY | 2 CENTER SECTION |
| PORT STYLE | GASKET SEAL |
| PORT THREAD CLASS | 2B |
| PORT THREAD DIAMETER | 0.875 INCHES NOMINAL |
| PORT THREAD QUANTITY PER INCH | 14 |
| PORT THREAD SERIES DESIGNATOR | UNF |
| PRESSURE RATING | 3000.0 POUNDS PER SQUARE INCH MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY DIAMETER | 0.562 INCHES NOMINAL |
| MOUNTING PROVISION ARRANGEMENT STYLE | FOUR HOLE RECTANGULAR |
| MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| MOUNTING TYPE AND LOCATION | FLANGE PISTON ROD END |
| OVERALL HEIGHT | 3.000 INCHES NOMINAL |
| OVERALL WIDTH | 3.000 INCHES NOMINAL |
| SPECIAL FEATURES | VITON SEALS; W/ PISTON LIP SEAL; 8-HOLE FLANGE,4 MTG HOLES ON 2.050 IN. SQ,4 MTG HOLES ON 4.125 IN. SQ |
| TEMP RATING | 165.0 DEG FAHRENHEIT |
| TEMP RATING | -10.0 DEG FAHRENHEIT |