| DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |
| BODY MATERIAL | STEEL |
| BORE DIAMETER | 2.000 INCHES NOMINAL |
| COMPRESSED LENGTH | 8.625 INCHES NOMINAL |
| EXTENDED LENGTH | 170.625 INCHES NOMINAL |
| FEATURES PROVIDED | CUSHIONED STROKE |
| FIRST END OUTSIDE DIAMETER | 1.000 INCHES NOMINAL ALL WORKING ENDS |
| FIRST END EXTERNAL THREAD LENGTH | 3.750 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END STYLE | EXTERNAL THREADED ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD CLASS | 2A ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIAMETER | 0.750 INCHES NOMINAL ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD QUANTITY PER INCH | 16 ALL WORKING ENDS |
| FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF ALL WORKING ENDS |
| INTEGRAL VALVE OPERATION METHOD | HYDRAULIC |
| LONGEST VERTICAL DISTANCE BETWEEN MOUNTING CENTERS | 84.875 INCHES NOMINAL |
| LONGEST HORIZONTAL DISTANCE BETWEEN MOUNTING CENTERS | 0.938 INCHES NOMINAL |
| PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END AND 1 PISTON ROD END |
| PORT STYLE | GASKET SEAL ALL PORTS |
| PORT THREAD CLASS | 2B ALL PORTS |
| PORT THREAD DIAMETER | 0.875 INCHES NOMINAL ALL PORTS |
| PORT THREAD QUANTITY PER INCH | 14 ALL PORTS |
| PORT THREAD SERIES DESIGNATOR | UNF ALL PORTS |
| PRESSURE RATING | 3000.0 POUNDS PER SQUARE INCH MAXIMUM |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY THREAD DIAMETER | 0.500 INCHES NOMINAL |
| MOUNTING FACILITY THREAD CLASS | 2B |
| MOUNTING FACILITY THREAD DIRECTION | RIGHT-HAND |
| MOUNTING FACILITY THREAD LENGTH | 0.438 INCHES NOMINAL |
| MOUNTING FACILITY THREAD QUANTITY PER INCH | 13 |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNC |
| MOUNTING PROVISION ARRANGEMENT STYLE | FOUR HOLE RECTANGULAR |
| MOUNTING PROVISION | THREADED MOUNTING HOLES |
| MOUNTING TYPE AND LOCATION | FLANGE CYLINDER HEAD END AND SCREW BOTH ENDS |
| OVERALL HEIGHT | 3.000 INCHES NOMINAL |
| OVERALL WIDTH | 3.000 INCHES NOMINAL |
| SPECIAL FEATURES | 3X5.125 IN. FLANGE W/ FOUR 0.562 IN. DIA MTG HOLES; W/ PISTON LIP SEAL,NEEDLE VALVE,CHECK VALVE |
| TEMP RATING | -10.0 DEG FAHRENHEIT AND 165.0 DEG FAHRENHEIT |