|
|
|
National Stock Number:
3040-00-941-7328
Federal Supply Class:
3040
National Item Identification Number:
009417328
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 101835 | 10138 | ASTRONAUTICS CORPORATION OF AMERICA |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 260 OR | | COPPER ALLOY 262 OR | | COPPER ALLOY 268 OR | | COPPER ALLOY 270 OR | | COPPER ALLOY 272 OR | | COPPER ALLOY 274 OR | | COPPER ALLOY 280 OR | | COPPER ALLOY 330 OR | | COPPER ALLOY 331 OR | | COPPER ALLOY 332 OR | | COPPER ALLOY 335 OR | | COPPER ALLOY 340 OR | | COPPER ALLOY 342 OR | | COPPER ALLOY 344 OR | | COPPER ALLOY 345 OR | | COPPER ALLOY 347 OR | | COPPER ALLOY 348 OR | | COPPER ALLOY 350 OR | | COPPER ALLOY 353 OR | | COPPER ALLOY 356 OR | | COPPER ALLOY 360 OR | | COPPER ALLOY 370 OR | | COPPER ALLOY 462 OR | | COPPER ALLOY 464 OR | | COPPER ALLOY 465 OR | | COPPER ALLOY 466 OR | | COPPER ALLOY 467 OR | | COPPER ALLOY 482 OR | | COPPER ALLOY 485 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626, COMP 11, 1/2H FED SPEC SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | ROUND W/SINGLE CHAMFER | | CHAMFER ANGLE IN DEG | 45.0 | | OUTSIDE DIAMETER | 0.188 INCHES NOMINAL | | THICKNESS | 0.141 INCHES NOMINAL | | BORE DIAMETER | 0.0940 INCHES MINIMUM AND | | 0.0960 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.116 INCHES NOMINAL | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 120.0 | | SECURING HOLE TYPE AND LOCATION | THREADED ALL HOLES | | SCREW THREAD SERIES DESIGNATOR AND LOCATION | ALL HOLES UNF | | NOMINAL THREAD SIZE AND LOCATION | 0.060 INCHES ALL HOLES | | FSC APPLICATION DATA | INDICATORS,ATTITUDE | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 10138 | | DESIGN CONTROL REFERENCE | 101835 |
|
|