| MATERIAL | COPPER ALLOY 511 |
| WORM THREAD QUANTITY | 7 |
| WORM PRESSURE ANGLE IN DEG | 14.500 |
| WORM THREAD LEAD | 0.063 INCHES NOMINAL |
| WORM THREAD DIRECTION | RIGHT-HAND |
| WORM HELIX ANGLE | 3 DEGREES 24 MINUTES |
| WORM OUTSIDE DIAMETER | 0.374 INCHES NOMINAL |
| WORM PITCH DIAMETER | 0.332 INCHES MINIMUM AND |
| 0.334 INCHES MAXIMUM |
| WORM THREAD SECTION LENGTH | 0.437 INCHES NOMINAL |
| WORM BODY TAPERED BEARING SURFACE END | NOT PROVIDED |
| SHAFT LOCATION | BOTH ENDS OF WORM |
| END SIMILARITY | NOT IDENTICAL |
| STRAIGHT UNTHREADED LENGTH | 0.250 INCHES NOMINAL FIRST END, FIRST PORTION |
| 1.375 INCHES NOMINAL FIRST END, SECOND PORTION |
| 0.298 INCHES NOMINAL SECOND END, FIRST PORTION |
| 0.218 INCHES NOMINAL SECOND END, SECOND PORTION |
| 0.328 INCHES NOMINAL SECOND END, THIRD PORTION |
| 0.046 INCHES NOMINAL SECOND END, FOURTH PORTION |
| 0.735 INCHES NOMINAL SECOND END, FIFTH PORTION |
| STRAIGHT UNTHREADED SECTION DIAMETER | 0.260 INCHES NOMINAL FIRST END, FIRST PORTION |
| 0.249 INCHES NOMINAL FIRST END, SECOND PORTION |
| 0.260 INCHES NOMINAL SECOND END, FIRST PORTION |
| 0.234 INCHES NOMINAL SECOND END, SECOND PORTION |
| 0.438 INCHES NOMINAL SECOND END, THIRD PORTION |
| 0.260 INCHES NOMINAL SECOND END, FOURTH PORTION |
| 0.249 INCHES NOMINAL SECOND END, FIFTH PORTION |
| UNTHREADED SECTION PIN HOLE DIAMETER | 0.0780 INCHES NOMINAL FIRST END, SECOND PORTION |
| 0.0780 INCHES NOMINAL SECOND END, FIFTH PORTION |
| OVERALL LENGTH | 3.687 INCHES NOMINAL |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 19200 |
| DESIGN CONTROL REFERENCE | 8211668 |