|
|
|
National Stock Number:
3040-00-540-5441
Federal Supply Class:
3040
National Item Identification Number:
005405441
Description:
COLLAR,SHAFT
Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
|
Manufacturer Information:
| 201474PC5 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| MATERIAL | COPPER ALLOY 464 | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-B-994, COMP A-CANCELED MIL SPEC SINGLE MATERIAL RESPONSE | | STYLE DESIGNATOR | ROUND STEPPED | | OUTSIDE DIAMETER | 0.625 INCHES NOMINAL | | THICKNESS | 2.080 INCHES NOMINAL | | SMALL END DIAMETER | 0.592 INCHES MINIMUM AND | | 0.594 INCHES MAXIMUM | | BORE DIAMETER | 0.4375 INCHES MINIMUM AND | | 0.4379 INCHES MAXIMUM | | LARGEST DIAMETER LENGTH | 0.740 INCHES MINIMUM AND | | 0.760 INCHES MAXIMUM | | SECURING HOLE QUANTITY | 2 | | ANGLE BETWEEN CENTERLINES OF SECURING HOLES IN DEG | 180.0 | | SECURING HOLE TYPE AND LOCATION | TAPER PIN PILOT SINGLE HOLE | | TAPERED PIN SIZE ACCOMMODATED AND LOCATION | 5/0 SINGLE HOLE |
|
|