3120-00-507-3230 BEARING,SLEEVE Index 2910-00-507-3232 BEARING

National Stock Number:
3040-00-507-3231

Federal Supply Class:
3040

National Item Identification Number:
005073231

Description:
SHAFT,STRAIGHT

Detail:
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for jubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.


Manufacturer Information:
10298615434CUMMINS INC.
1029860015434CUMMINS INC.


Techincal Specification:
END SIMILARITYNOT IDENTICAL
FIRST END HOLE DEPTH0.237 INCHES MINIMUM AND 0.256 INCHES MAXIMUM
FIRST END HOLE DIAMETER0.1420 INCHES MINIMUM AND 0.1440 INCHES MAXIMUM FIRST HOLE
FIRST END DIAMETER0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM
FIRST END DISTANCE FROM HOLE CENTER TO END0.815 INCHES NOMINAL
FIRST END STYLEUNTHREADED CROSS DRILLED
OVERALL LENGTH2.430 INCHES MINIMUM AND 2.450 INCHES MAXIMUM
MATERIALSTEEL COMP 1045 OR STEEL COMP 1145
SECOND END GROOVE DIAMETER0.8320 INCHES MINIMUM AND 0.8380 INCHES MAXIMUM
SECOND END GROOVE WIDTH0.0460 INCHES MINIMUM AND 0.0490 INCHES MAXIMUM
SECOND END HOLE DEPTH0.061 INCHES MINIMUM AND 0.080 INCHES MAXIMUM
SECOND END HOLE DIAMETER0.1590 INCHES NOMINAL FIRST HOLE
SECOND END DIAMETER0.8715 INCHES MINIMUM AND 0.8720 INCHES MAXIMUM
SECOND END DISTANCE FROM END TO GROOVE0.042 INCHES MINIMUM AND 0.052 INCHES MAXIMUM
SECOND END DISTANCE FROM HOLE CENTER TO END0.190 INCHES MINIMUM AND 0.198 INCHES MAXIMUM
SECOND END STYLECROSS DRILLED AND CIRCULAR GROOVED
SPECIAL FEATURESFIRST END THREE ADDITIONAL UNTHD CROSS DRILLED HOLES 90 DEG ANGLES BTWN HOLES; FIRST END INTERNAL BORE 0.625 IN. NOM DIA,2.065 IN. NOM DP;SECOND END SIX INTERNAL SPLINES 0.566 IN. DIA,0.375 IN. NOM SPLINE LG
SURFACE FINISH63.0 MICROINCHES


Click here to Register for Free 30-day Trial

© 2026 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us