3040-00-163-9107, COLLAR,SHAFT

6150-00-163-9096 WIRING HARNESS,BRANCHED

National Stock Number:
3040-00-163-9107

Federal Supply Class:
3040

National Item Identification Number:
001639107

Description:
COLLAR,SHAFT

Detail:
An item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

Manufacturer Information:

1201565P1

10001

NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER

Techincal Specification:

MATERIAL	STEEL COMP 416 OR
	STEEL COMP 202 OR
	STEEL COMP 302 OR
	STEEL COMP 303 OR
	STEEL COMP 303SE OR
	STEEL COMP 304 OR
	STEEL COMP 304L OR
	STEEL COMP 305 OR
	STEEL COMP 309 OR
	STEEL COMP 310 OR
	STEEL COMP 316 OR
	STEEL COMP 316L OR
	STEEL COMP 317 OR
	STEEL COMP 321 OR
	STEEL COMP 322 OR
	STEEL COMP 324 OR
	STEEL COMP 347 OR
	STEEL COMP 633 OR
	STEEL COMP 634 OR
	STEEL COMP 403 OR
	STEEL COMP 405 OR
	STEEL COMP 410 OR
	STEEL COMP 414 OR
	STEEL COMP 416SE OR
	STEEL COMP 420 OR
	STEEL COMP 430 OR
	STEEL COMP 430F OR
	STEEL COMP 430FSE OR
	STEEL COMP 431 OR
	STEEL COMP 440A OR
	STEEL COMP 440B OR
	STEEL COMP 440C OR
	STEEL COMP 440F OR
	STEEL COMP 440FSE OR
	STEEL COMP 446
MATERIAL DOCUMENT AND CLASSIFICATION	FED STD 66 FED STD ALL MATERIAL RESPONSES OR
	AISI 416 ASSN STD 1ST MATERIAL RESPONSE OR
	SAE 51416 ASSN STD 1ST MATERIAL RESPONSE AND
	QQ-S-763 FED SPEC ALL MATERIAL RESPONSES
SURFACE TREATMENT	PASSIVATE
STYLE DESIGNATOR	ROUND STEPPED
OUTSIDE DIAMETER	0.625 INCHES NOMINAL
THICKNESS	0.280 INCHES MINIMUM AND
	0.320 INCHES MAXIMUM
SMALL END DIAMETER	0.450 INCHES MINIMUM AND
	0.470 INCHES MAXIMUM
BORE DIAMETER	0.3750 INCHES MINIMUM AND
	0.3755 INCHES MAXIMUM
LARGEST DIAMETER LENGTH	0.270 INCHES MINIMUM AND
	0.290 INCHES MAXIMUM
SURFACE FINISH AND LOCATION	63 MICROINCHES INSIDE PERIPHERY
	125 MICROINCHES BOTH BEARING FLATS
	125 MICROINCHES LARGEST OUTSIDE PERIPHERY
	63 MICROINCHES SMALLEST BEARING FLAT
	125 MICROINCHES SMALLEST OUTSIDE PERIPHERY
SECURING HOLE QUANTITY	1
SECURING HOLE TYPE AND LOCATION	THREADED SINGLE HOLE
SCREW THREAD SERIES DESIGNATOR AND LOCATION	SINGLE HOLE UNC
NOMINAL THREAD SIZE AND LOCATION	0.138 INCHES SINGLE HOLE
THE MANUFACTURERS DATA
MANUFACTURERS CODE	10001
DESIGN CONTROL REFERENCE	1201565P1

Click here to Register for Free 30-day Trial