|
|
|
National Stock Number:
3020-01-321-8405
Federal Supply Class:
3020
National Item Identification Number:
013218405
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 5544214 | 05606 | GENERAL DYNAMICS-OTS, INC. | | 5544214 | 53711 | NAVAL SEA SYSTEMS COMMAND |
|
Techincal Specification:
| BODY STYLE | PLAIN, SOLID | | BORE STYLE | INVOLUTE SPLINE BOTH ENDS | | BORE NOMINAL DIAMETER | 0.599 INCHES BOTH ENDS | | END NOMINAL DIAMETER | 0.786 INCHES SECOND END | | END NOMINAL LENGTH | 0.520 INCHES SECOND END | | FACE NOMINAL WIDTH | 0.435 INCHES | | FIRST STEP NOMINAL DIAMETER | 1.060 INCHES SECOND END | | FIRST STEP NOMINAL LENGTH | 0.365 INCHES SECOND END | | HARDNESS RATING | 33.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL | | HUB STYLE DESIGNATOR | 1 STEP SECOND END | | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5659 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5862 ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | MATERIAL | STEEL COMP XM-12 OVERALL | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.885 INCHES SECOND END | | NOMINAL OUTSIDE DIAMETER | 1.500 INCHES | | NOMINAL OVERALL LENGTH | 1.320 INCHES | | PITCH ANGLE | 23.9625 DEGREES | | PITCH DIAMETER | 1.3333 INCHES NOMINAL | | PRESSURE ANGLE | 20.0000 DEGREES | | SPLINE PITCH DIAMETER | 0.5313 INCHES NOMINAL BOTH ENDS | | SPLINE QUANTITY | 17 BOTH ENDS | | STYLE DESIGNATOR | PERIPHERAL FACE, BACK HUB PROTRUDING | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171,FINISH NO. 5.4.1 MIL STD SINGLE TREATMENT RESPONSE OVERALL | | SURFACE TREATMENT | PASSIVATE OVERALL | | TEETH QUANTITY | 20 | | TEETH TYPE | STRAIGHT |
|
|