| BORE STYLE | PLAIN FIRST END |
| BORE STYLE | PLAIN SECOND END |
| BORE NOMINAL DIAMETER | 0.374 INCHES SECOND END |
| BORE NOMINAL DIAMETER | 0.530 INCHES FIRST END |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| FURNISHED ITEMS AND QUANTITY | 1 DOWEL PIN AND 1 BORE INSERT |
| FACE NOMINAL WIDTH | 0.190 INCHES |
| HUB NOMINAL DIAMETER | 0.530 INCHES SECOND END |
| HUB STYLE DESIGNATOR | PLAIN SECOND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/8 FED SPEC SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763, COND A FED SPEC SINGLE MATERIAL RESPONSE SLEEVE |
| MATERIAL | ALUMINUM ALLOY 6061 BODY |
| MATERIAL | STEEL COMP 304 SLEEVE |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.125 INCHES SECOND END |
| NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.745 INCHES FIRST END |
| NOMINAL OUTSIDE DIAMETER | 2.677 INCHES |
| PITCH DIAMETER | 2.6071 INCHES NOMINAL |
| PRECISION CLASSIFICATION | QUALITY NUMBER 11 |
| PRESSURE ANGLE | 20.0000 DEGREES |
| SPECIAL FEATURES | BORE INSERT IS SPLINED SLEEVE, 1.41 IN. O/A LG., 0.375 IN. OD, 9 INTERNAL TEETH. WEAPON SYSTEM ESSENTIAL |
| STYLE DESIGNATOR | PROTRUDING HUBS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625, TY 2 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-STD-171, FN 5.4 MIL STD SINGLE TREATMENT RESPONSE SLEEVE |
| SURFACE TREATMENT | ANODIZE BODY |
| SURFACE TREATMENT | PASSIVATE SLEEVE |
| TEETH QUANTITY | 73 |
| TOOTH FORM | STUB |