|
|
|
National Stock Number:
3020-00-141-5361
Federal Supply Class:
3020
National Item Identification Number:
001415361
Description:
GEAR,BEVEL
Detail:
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL.
|
Manufacturer Information:
| 1596830P1 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 1596830P1 | 36549 | JOLY ENGINEERING LTD |
|
Techincal Specification:
| MATERIAL | STEEL COMP 4150H OVERALL | | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE AND | | AISI/SAE 4150H ASSN STD SINGLE MATERIAL RESPONSE OVERALL | | SURFACE TREATMENT | OXIDE OVERALL | | HARDNESS RATING | 27.0 ROCKWELL C MINIMUM AND | | 35.0 ROCKWELL C MAXIMUM OVERALL | | TEETH QUANTITY | 60 | | TEETH TYPE | STRAIGHT | | PRESSURE ANGLE | 20.0000 DEGREES | | PITCH ANGLE | 71.5667 DEGREES | | PRECISION CLASSIFICATION | QUALITY NUMBER 6 OR | | QUALITY NUMBER 7 | | BACKLASH DESIGNATION | GRADE A | | STYLE DESIGNATOR | SIDE FACE, FRONT HUB RECESSED, BACK HUB PROTRUDING | | PITCH DIAMETER | 5.0000 INCHES NOMINAL | | NOMINAL OVERALL LENGTH | 0.936 INCHES | | NOMINAL OUTSIDE DIAMETER | 5.031 INCHES | | FACE NOMINAL WIDTH | 0.625 INCHES | | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | 0.403 INCHES SECOND END | | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | 0.036 INCHES FIRST END | | BORE STYLE | W/ KEYWAY BOTH ENDS | | BORE NOMINAL DIAMETER | 0.781 INCHES BOTH ENDS | | KEYWAY NOMINAL WIDTH | 0.156 INCHES BOTH ENDS | | NOMINAL DISTANCE FROM BORE CENTER TO KEYWAY BOTTOM | 0.474 INCHES BOTH ENDS | | HUB STYLE DESIGNATOR | PLAIN FIRST END | | 1 STEP SECOND END | | HUB NOMINAL DIAMETER | 1.250 INCHES FIRST END | | END NOMINAL LENGTH | 0.060 INCHES SECOND END | | END NOMINAL DIAMETER | 0.927 INCHES SECOND END | | FIRST STEP NOMINAL LENGTH | 0.343 INCHES SECOND END | | FIRST STEP NOMINAL DIAMETER | 1.250 INCHES SECOND END | | BODY STYLE | WEBBED, OFFSET, WITH LIGHTENING HOLES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 36549 | | DESIGN CONTROL REFERENCE | 1596830P1 |
|
|