|
|
|
National Stock Number:
2910-01-232-7069
Federal Supply Class:
2910
National Item Identification Number:
012327069
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 25055334 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 25055334 | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | GF62N | 61928 | GENERAL MOTORS CORP AC-DELCO DIV GOVERNMENT ORDER DEPT | | GF62N | 70040 | GENERAL MOTORS CORP AC ROCHESTER DIV | | GF62N | 7X677 | GENERAL MOTORS LLC | | 25055334 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| BODY OVERALL LENGTH | 2.554 INCHES MINIMUM AND 2.586 INCHES MAXIMUM | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | PARALLEL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | STYLE DESIGNATOR | SUMP TYPE | | SUPPLEMENTARY FEATURES | PORTABLE HEATER FUEL SYSTEM,ASSEMBLED FROM P/N 5650720 FILTER,P/N 5651386 END PLATE AND P/N 854586 END PLATE | | THREAD SERIES DESIGNATOR | UN |
|
|