|
|
|
National Stock Number:
2520-01-040-2160
Federal Supply Class:
2520
National Item Identification Number:
010402160
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 3977383 | 11862 | GENERAL MOTORS CORP CHEVROLET MOTOR DIV SPECIAL PRODUCTS DEPT | | 3977383 | 23862 | MILITARY VEHICLES OPN GENERAL MOTORS TRUCK AND BUS GROUP MS 2603-02 | | 3977383 | 7X677 | GENERAL MOTORS LLC |
|
Techincal Specification:
| FIRST END BEARING SEAT | INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END BEARING SEAT | NOT INCLUDED | | MATERIAL | STEEL | | OVERALL LENGTH | 32.450 INCHES NOMINAL | | FIRST END TYPE | FLANGED | | FLANGE OVERALL THICKNESS | 0.850 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.470 INCHES NOMINAL | | FLANGE OUTSIDE DIAMETER | 4.460 INCHES MINIMUM AND | | 4.470 INCHES MAXIMUM | | MOUNTING FACILITY TYPE AND QUANTITY | 8 UNTHREADED HOLE | | HOLE DIAMETER | 0.511 INCHES MINIMUM AND | | 0.515 INCHES MAXIMUM | | FIRST END BEARING SEAT DIAMETER | 1.460 INCHES NOMINAL | | FIRST END BEARING SEAT WIDTH | 0.750 INCHES MINIMUM AND | | 1.000 INCHES MAXIMUM | | FIRST END DISTANCE FROM BEARING SEAT TO END | 1.500 INCHES MINIMUM AND | | 1.780 INCHES MAXIMUM | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END SPLINE QUANTITY | 30 | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 37.5 | | SECOND END PITCH DIAMETER | 1.500 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.110 INCHES NOMINAL | | END HOLE TYPE | DRILLED | | HOLE QUANTITY | 1 | | DRILLED HOLE DIAMETER | 0.400 INCHES NOMINAL | | HOLE DEPTH | 0.400 INCHES NOMINAL |
|
|