|
|
|
National Stock Number:
2520-00-318-1131
Federal Supply Class:
2520
National Item Identification Number:
003181131
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 68KH3136P2 | 76040 | MACK TRUCKS INC PARTS OPN | | 8332813 | 19207 | U S ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END BEARING SEAT | NOT INCLUDED | | MATERIAL | STEEL COMP 4150H OR | | STEEL COMP 8650H | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048 FS 4150H OR FS 8650H GRAIN SIZE 5,8 MIL SPEC SINGLE MATERIAL RESPONSE | | METALLIC HARDNESS RATING | 50.0 MINIMUM ROCKWELL C AND | | 53.0 MAXIMUM ROCKWELL C | | OVERALL LENGTH | 53.028 INCHES MINIMUM AND | | 53.036 INCHES MAXIMUM | | FIRST END TYPE | SPLINED | | FIRST END SPLINE TYPE | INVOLUTE | | FIRST END SPLINE QUANTITY | 66 | | FIRST END SPLINE PRESSURE ANGLE IN DEG | 40.0 | | FIRST END PITCH DIAMETER | 8.012 INCHES NOMINAL | | FIRST END SPLINE LENGTH | 0.558 INCHES MINIMUM AND | | 0.566 INCHES MAXIMUM | | SECOND END SPLINE TYPE | INVOLUTE | | SECOND END SPLINE QUANTITY | 17 | | SECOND END SPLINE PRESSURE ANGLE IN DEG | 40.0 | | SECOND END PITCH DIAMETER | 2.493 INCHES NOMINAL | | SECOND END SPLINE LENGTH | 2.810 INCHES MINIMUM AND | | 2.816 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 19207 | | DESIGN CONTROL REFERENCE | 8332813 |
|
|