|
|
|
National Stock Number:
2520-00-316-3709
Federal Supply Class:
2520
National Item Identification Number:
003163709
Description:
SHAFT,AXLE,AUTOMOTIVE
Detail:
A SHAFT WHICH IS A COMPONENT OF AXLE ASSEMBLY, AUTOMOTIVE, DRIVING, USED TO TRANSMIT ROTARY MOTION FROM THE DIFFERENTIAL ASSEMBLY EITHER DIRECTLY OR INDIRECTLY TO THE WHEEL HUBS. EXCLUDES SHAFTS WITH A UNIVERSAL JOINT OR A COMPONENT OF A UNIVERSAL JOINT ATTACHED TO IT.
|
Manufacturer Information:
| 65A81-C916 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 65A81C916-02 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| FIRST END BEARING SEAT | NOT INCLUDED | | SECOND END TYPE | SPLINED | | SECOND END BEARING SEAT | NOT INCLUDED | | MATERIAL | STEEL COMP 4150 | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 COMPOSITION 4150 FED SPEC SINGLE MATERIAL RESPONSE | | METALLIC HARDNESS RATING | 45.0 MINIMUM ROCKWELL C AND | | 48.0 MAXIMUM ROCKWELL C | | OVERALL LENGTH | 35.250 INCHES NOMINAL | | FIRST END TYPE | FLANGED | | FLANGE OVERALL THICKNESS | 0.375 INCHES NOMINAL | | FLANGE THICKNESS AT MOUNTING HOLE | 0.312 INCHES NOMINAL | | FLANGE OUTSIDE DIAMETER | 3.968 INCHES NOMINAL | | MOUNTING FACILITY TYPE AND QUANTITY | 6 UNTHREADED HOLE | | HOLE DIAMETER | 0.327 INCHES MINIMUM AND | | 0.336 INCHES MAXIMUM | | SECOND END SPLINE TYPE | STRAIGHT | | SECOND END SPLINE QUANTITY | 10 | | SECOND END SPLINE LENGTH | 1.500 INCHES NOMINAL | | SECOND END SPLINE MAJOR DIAMETER | 1.123 INCHES MINIMUM AND | | 1.125 INCHES MAXIMUM | | SECOND END SPLINE MINOR DIAMETER | 0.915 INCHES MINIMUM AND | | 0.957 INCHES MAXIMUM | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 30003 | | DESIGN CONTROL REFERENCE | 65A81C916-02 |
|