|
|
|
National Stock Number:
1650-01-245-8555
Federal Supply Class:
1650
National Item Identification Number:
012458555
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| A02DS236-1 | 77272 | THE BOEING COMPANY | | R9W1913 | 00736 | FALLS FILTRATION TECHNOLOGIES, INC. |
|
Techincal Specification:
| BODY DIAMETER | 5.133 INCHES NOMINAL | | BODY OVERALL LENGTH | 7.380 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | DIFFERENTIAL PRESSURE | 100.0 POUNDS PER SQUARE INCH | | DROP PRESSURE | 1.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | ALUMINUM ALLOY BODY | | MESH SIZE | 40.0 | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-C-5541,CLASS 3 MIL SPEC SINGLE TREATMENT RESPONSE BODY | | SURFACE TREATMENT | ANODIZE BODY | | TEMP RATING | -40.0 FAHRENHEIT MINIMUM AND 300.0 FAHRENHEIT MAXIMUM | | WIRE DIAMETER | 0.010 INCHES NOMINAL |
|
|