| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| CONNECTION DESIGN | THREADED |
| CONNECTION GOVERNMENT SPEC/STD | AND 10050-6 |
| CONNECTION TYPE | DRAIN FIRST END |
| CONNECTION TYPE | INLET SECOND END |
| CONNECTION TYPE | OUTLET THIRD END |
| CONNECTION QUANTITY | 1 AND 1 AND 1 |
| CONSTANT DISPLACEMENT PER REVOLUTION | 0.095 CUBIC INCHES |
| DISPLACEMENT TYPE | CONSTANT |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 6060.000 |
| MATERIAL | ALUMINUM ALLOY HOUSING |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000 PSI MINUS 65 DEG F TO PLUS 160 DEG F |
| MOUNTING BOLT HOLE SPACING | 1.876 IN. BY 1.876 IN. C TO C |
| MOUNTING GOVERNMENT STANDARD | AND 10260 |
| MOUNTING HOLE DIAMETER | 0.281 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING TYPE | FLANGE |
| SHAFT ROTATION DIRECTION | CLOCKWISE AND COUNTERCLOCKWISE |
| PITCH DIAMETER | 0.4583 INCHES NOMINAL |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| THREAD SIZE | 0.375-24 AND 0.562-18 AND 0.562-18 |
| TORQUE LOAD RATING | 45.4 INCH-POUNDS |
| SPLINE LENGTH | 0.500 INCHES NOMINAL |
| SPLINE MAJOR DIAMETER | 0.500 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.408 INCHES NOMINAL |
| SPLINE PITCH | 24/48 |
| SPLINE PRESSURE ANGLE IN DEG | 30.000 |
| SPLINE QUANTITY | 11 |
| SURFACE TREATMENT | ANODIZE HOUSING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LOCATION | INTERNAL SECOND |
| THREAD LOCATION | INTERNAL THIRD |
| THREAD LOCATION | INTERNAL FIRST |