| DISPLACEMENT TYPE | CONSTANT |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 4310.0 |
| CONNECTION TYPE | INLET |
| MOUNTING TYPE | FLANGE |
| CONNECTION QUANTITY | 4 |
| CONNECTION DESIGN | THREADED |
| DRIVE SHAFT TYPE | SPLINED, INVOLUTE EXTERNAL |
| MATERIAL | STEEL HOUSING |
| MOUNTING GOVERNMENT STANDARD | AND10261 |
| MAXIMUM WORKING PRESSURE RATING AT SPECIFIED TEMP RANGE | 3000PSI AT MINUS 65 DEG F TO PLUS 360 DEG F |
| TORQUE LOAD RATING | 206.0 INCH-POUNDS |
| CONNECTION GOVERNMENT SPEC/STD | AND10050-4 |
| THREAD SIZE | 0.437-20 |
| SCREW THREAD SERIES DESIGNATOR | UNF |
| THREAD LOCATION | INTERNAL |
| THREAD DIRECTION | RIGHT-HAND |
| SPLINE QUANTITY | 12 |
| SPLINE MAJOR DIAMETER | 0.650 INCHES NOMINAL |
| SPLINE MINOR DIAMETER | 0.550 INCHES NOMINAL |
| SPLINE PITCH | 20/40 |
| PITCH DIAMETER | 0.600 INCHES NOMINAL |
| SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| SPLINE LENGTH | 0.812 INCHES NOMINAL |
| SHAFT PROTRUSION LENGTH | 0.966 INCHES NOMINAL |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING BOLT HOLE SPACING | 3.536 IN. BY 3.536 IN. |
| MOUNTING HOLE DIAMETER | 0.344 INCHES NOMINAL |
| REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DWG 65651-04027-101 FSCM 78286 |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 78286 |
| MFR SOURCE CONTROLLING REFERENCE | 65651-04027-101 |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 62983 |
| DESIGN CONTROL REFERENCE | MF1-059-1A |